POST Lib_TPCheck/Get?iid={iid}

{
  "head": {
    "image": [
      "sample string 1",
      "sample string 2"
    ],
    "IId": 1,
    "Report_No": "sample string 2",
    "Chk_Term": "sample string 3",
    "Tp_No": "sample string 4",
    "Status": "sample string 5",
    "Def_valid": "2024-11-28 14:44:38",
    "Def_NO": "sample string 6",
    "Chk_Name": "sample string 7",
    "Employee_No": "sample string 8",
    "TP_Name": "sample string 9",
    "ENStandard": 1,
    "Cracks": "sample string 10",
    "CracksChk": 1,
    "Gas_Pore": "sample string 11",
    "Gas_PoreChk": 1,
    "Spatter": "sample string 12",
    "SpatterChk": 1,
    "Extrusion": "sample string 13",
    "ExtrusionChk": 1,
    "Particular": "sample string 14",
    "ParticularChk": 1,
    "Burn_Side": "sample string 15",
    "Burn_SideChk": 1,
    "Adhering": "sample string 16",
    "AdheringChk": 1,
    "Welded_Gap": "sample string 17",
    "Welded_GapChk": 1,
    "Percent1": "sample string 18",
    "Percent2": "sample string 19",
    "Others": "sample string 20",
    "Conclusion": 1,
    "Groove_Type": "sample string 21",
    "Quantity": 1,
    "ImageNo": "sample string 22",
    "Testing_Pos": "sample string 23",
    "Material": "sample string 24",
    "Material_Size": "sample string 25",
    "Weld_Process": "sample string 26",
    "Tool_Name": "sample string 27",
    "Surface_Preparation": 1,
    "Heat_Treatment": 1,
    "Width_WeldMax": "sample string 28",
    "Width_WeldMin": "sample string 29",
    "Fillet_WeldMax": "sample string 30",
    "Fillet_WeldMin": "sample string 31",
    "Linear_Max": "sample string 32",
    "Linear_Min": "sample string 33",
    "Weld_HeightMax": "sample string 34",
    "Weld_HeightMin": "sample string 35",
    "Excess_Max": "sample string 36",
    "Excess_Min": "sample string 37",
    "Weld_PenetrationMax": "sample string 38",
    "Weld_PenetrationMin": "sample string 39",
    "Excessive": "sample string 40",
    "Inspection_Standard": "sample string 41",
    "Evaluation_Standard": "sample string 42",
    "Test_Procedure": "sample string 43",
    "Testing_Ratio": "sample string 44",
    "Repair_Satus": 1,
    "Recorded_Display": 1,
    "Remarks": "sample string 45",
    "Penetration_Type": "sample string 46",
    "Testing_Method": "sample string 47",
    "Penetrant_Type": "sample string 48",
    "Penetrant_Bath": "sample string 49",
    "Rinse_Type": "sample string 50",
    "Rinse_Bath": "sample string 51",
    "Developer_Type": "sample string 52",
    "Developer_Bath": "sample string 53",
    "Penetrant_Method": 1,
    "Permeate_Time": "sample string 54",
    "Developer_Method": 1,
    "Developer_Time": "sample string 55",
    "Part_Temp": "sample string 56",
    "Maker_Date": "2024-11-28 14:44:38",
    "Maker": "sample string 57",
    "Company_Name": "sample string 58",
    "TPChkType": 1,
    "Tp_Id": 1,
    "SignImg": "sample string 59",
    "Create_UserId": 1,
    "Pjt_abbr": "sample string 60",
    "tpr_no": "sample string 61",
    "ENStandard2": 62,
    "Conclusion2": 63,
    "Heat_Treatment2": 64,
    "Recorded_Display2": 65,
    "Surface_Preparation1": 66,
    "Surface_Preparation2": 67,
    "Surface_Preparation3": 68,
    "Penetrant_Method1": 69,
    "Penetrant_Method2": 70,
    "Penetrant_Method3": 71,
    "Penetrant_Method4": 72,
    "Developer_Method1": 73,
    "Developer_Method2": 74,
    "Developer_Method3": 75,
    "Developer_Method4": 76,
    "Repair_Satus1": 77,
    "Repair_Satus2": 78,
    "Repair_Satus3": 79,
    "EXSignImg": "QEA=",
    "Heat_Treatment1": 80
  },
  "para": [
    {
      "IId": 1,
      "MainId": 1,
      "Crack": "sample string 2",
      "Lack_Fusion": "sample string 3",
      "Lack_Penetration": "sample string 4",
      "Pore": "sample string 5",
      "Slag_Inclusion": "sample string 6",
      "Incompletely": "sample string 7",
      "Undercut": "sample string 8",
      "Joint_Defect": "sample string 9",
      "SortNo": 1,
      "Welds_Pos_No": "sample string 10",
      "Defect_No": "sample string 11",
      "Defect_Type": "sample string 12",
      "Defect_Trace": "sample string 13",
      "Repair_Grinding": "sample string 14",
      "Repair_Welding": "sample string 15",
      "Result_NoDefect": "sample string 16",
      "Result_Defect": "sample string 17",
      "Result_DefectType": "sample string 18",
      "Final_Class": "sample string 19"
    },
    {
      "IId": 1,
      "MainId": 1,
      "Crack": "sample string 2",
      "Lack_Fusion": "sample string 3",
      "Lack_Penetration": "sample string 4",
      "Pore": "sample string 5",
      "Slag_Inclusion": "sample string 6",
      "Incompletely": "sample string 7",
      "Undercut": "sample string 8",
      "Joint_Defect": "sample string 9",
      "SortNo": 1,
      "Welds_Pos_No": "sample string 10",
      "Defect_No": "sample string 11",
      "Defect_Type": "sample string 12",
      "Defect_Trace": "sample string 13",
      "Repair_Grinding": "sample string 14",
      "Repair_Welding": "sample string 15",
      "Result_NoDefect": "sample string 16",
      "Result_Defect": "sample string 17",
      "Result_DefectType": "sample string 18",
      "Final_Class": "sample string 19"
    }
  ],
  "File_Address": "sample string 1",
  "File_Name": "sample string 2",
  "TP_Id": 3,
  "Success": 4,
  "Msg": "sample string 5",
  "Token": "sample string 6",
  "Key": "sample string 7",
  "FileName": "sample string 8",
  "FilePageCount": 9
}

<TPCheckModel xmlns:i="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.datacontract.org/2004/07/WeldingAPI.Models.EF">
  <FileName xmlns="http://schemas.datacontract.org/2004/07/WeldingAPI.Models">sample string 8</FileName>
  <FilePageCount xmlns="http://schemas.datacontract.org/2004/07/WeldingAPI.Models">9</FilePageCount>
  <Key xmlns="http://schemas.datacontract.org/2004/07/WeldingAPI.Models">sample string 7</Key>
  <Msg xmlns="http://schemas.datacontract.org/2004/07/WeldingAPI.Models">sample string 5</Msg>
  <Success xmlns="http://schemas.datacontract.org/2004/07/WeldingAPI.Models">4</Success>
  <Token xmlns="http://schemas.datacontract.org/2004/07/WeldingAPI.Models">sample string 6</Token>
  <File_Address>sample string 1</File_Address>
  <File_Name>sample string 2</File_Name>
  <TP_Id>3</TP_Id>
  <head>
    <Adhering>sample string 16</Adhering>
    <AdheringChk>1</AdheringChk>
    <Burn_Side>sample string 15</Burn_Side>
    <Burn_SideChk>1</Burn_SideChk>
    <Chk_Name>sample string 7</Chk_Name>
    <Chk_Term>sample string 3</Chk_Term>
    <Company_Name>sample string 58</Company_Name>
    <Conclusion>1</Conclusion>
    <Conclusion2>63</Conclusion2>
    <Cracks>sample string 10</Cracks>
    <CracksChk>1</CracksChk>
    <Create_UserId>1</Create_UserId>
    <Def_NO>sample string 6</Def_NO>
    <Def_valid>2024-11-28T14:44:38.0043997+08:00</Def_valid>
    <Developer_Bath>sample string 53</Developer_Bath>
    <Developer_Method>1</Developer_Method>
    <Developer_Method1>73</Developer_Method1>
    <Developer_Method2>74</Developer_Method2>
    <Developer_Method3>75</Developer_Method3>
    <Developer_Method4>76</Developer_Method4>
    <Developer_Time>sample string 55</Developer_Time>
    <Developer_Type>sample string 52</Developer_Type>
    <ENStandard>1</ENStandard>
    <ENStandard2>62</ENStandard2>
    <EXSignImg>QEA=</EXSignImg>
    <Employee_No>sample string 8</Employee_No>
    <Evaluation_Standard>sample string 42</Evaluation_Standard>
    <Excess_Max>sample string 36</Excess_Max>
    <Excess_Min>sample string 37</Excess_Min>
    <Excessive>sample string 40</Excessive>
    <Extrusion>sample string 13</Extrusion>
    <ExtrusionChk>1</ExtrusionChk>
    <Fillet_WeldMax>sample string 30</Fillet_WeldMax>
    <Fillet_WeldMin>sample string 31</Fillet_WeldMin>
    <Gas_Pore>sample string 11</Gas_Pore>
    <Gas_PoreChk>1</Gas_PoreChk>
    <Groove_Type>sample string 21</Groove_Type>
    <Heat_Treatment>1</Heat_Treatment>
    <Heat_Treatment1>80</Heat_Treatment1>
    <Heat_Treatment2>64</Heat_Treatment2>
    <IId>1</IId>
    <ImageNo>sample string 22</ImageNo>
    <Inspection_Standard>sample string 41</Inspection_Standard>
    <Linear_Max>sample string 32</Linear_Max>
    <Linear_Min>sample string 33</Linear_Min>
    <Maker>sample string 57</Maker>
    <Maker_Date>2024-11-28T14:44:38.0043997+08:00</Maker_Date>
    <Material>sample string 24</Material>
    <Material_Size>sample string 25</Material_Size>
    <Others>sample string 20</Others>
    <Part_Temp>sample string 56</Part_Temp>
    <Particular>sample string 14</Particular>
    <ParticularChk>1</ParticularChk>
    <Penetrant_Bath>sample string 49</Penetrant_Bath>
    <Penetrant_Method>1</Penetrant_Method>
    <Penetrant_Method1>69</Penetrant_Method1>
    <Penetrant_Method2>70</Penetrant_Method2>
    <Penetrant_Method3>71</Penetrant_Method3>
    <Penetrant_Method4>72</Penetrant_Method4>
    <Penetrant_Type>sample string 48</Penetrant_Type>
    <Penetration_Type>sample string 46</Penetration_Type>
    <Percent1>sample string 18</Percent1>
    <Percent2>sample string 19</Percent2>
    <Permeate_Time>sample string 54</Permeate_Time>
    <Pjt_abbr>sample string 60</Pjt_abbr>
    <Quantity>1</Quantity>
    <Recorded_Display>1</Recorded_Display>
    <Recorded_Display2>65</Recorded_Display2>
    <Remarks>sample string 45</Remarks>
    <Repair_Satus>1</Repair_Satus>
    <Repair_Satus1>77</Repair_Satus1>
    <Repair_Satus2>78</Repair_Satus2>
    <Repair_Satus3>79</Repair_Satus3>
    <Report_No>sample string 2</Report_No>
    <Rinse_Bath>sample string 51</Rinse_Bath>
    <Rinse_Type>sample string 50</Rinse_Type>
    <SignImg>sample string 59</SignImg>
    <Spatter>sample string 12</Spatter>
    <SpatterChk>1</SpatterChk>
    <Status>sample string 5</Status>
    <Surface_Preparation>1</Surface_Preparation>
    <Surface_Preparation1>66</Surface_Preparation1>
    <Surface_Preparation2>67</Surface_Preparation2>
    <Surface_Preparation3>68</Surface_Preparation3>
    <TPChkType>1</TPChkType>
    <TP_Name>sample string 9</TP_Name>
    <Test_Procedure>sample string 43</Test_Procedure>
    <Testing_Method>sample string 47</Testing_Method>
    <Testing_Pos>sample string 23</Testing_Pos>
    <Testing_Ratio>sample string 44</Testing_Ratio>
    <Tool_Name>sample string 27</Tool_Name>
    <Tp_Id>1</Tp_Id>
    <Tp_No>sample string 4</Tp_No>
    <Weld_HeightMax>sample string 34</Weld_HeightMax>
    <Weld_HeightMin>sample string 35</Weld_HeightMin>
    <Weld_PenetrationMax>sample string 38</Weld_PenetrationMax>
    <Weld_PenetrationMin>sample string 39</Weld_PenetrationMin>
    <Weld_Process>sample string 26</Weld_Process>
    <Welded_Gap>sample string 17</Welded_Gap>
    <Welded_GapChk>1</Welded_GapChk>
    <Width_WeldMax>sample string 28</Width_WeldMax>
    <Width_WeldMin>sample string 29</Width_WeldMin>
    <image xmlns:d3p1="http://schemas.microsoft.com/2003/10/Serialization/Arrays">
      <d3p1:string>sample string 1</d3p1:string>
      <d3p1:string>sample string 2</d3p1:string>
    </image>
    <tpr_no>sample string 61</tpr_no>
  </head>
  <para>
    <Lib_TPCheckPara>
      <Crack>sample string 2</Crack>
      <Defect_No>sample string 11</Defect_No>
      <Defect_Trace>sample string 13</Defect_Trace>
      <Defect_Type>sample string 12</Defect_Type>
      <Final_Class>sample string 19</Final_Class>
      <IId>1</IId>
      <Incompletely>sample string 7</Incompletely>
      <Joint_Defect>sample string 9</Joint_Defect>
      <Lack_Fusion>sample string 3</Lack_Fusion>
      <Lack_Penetration>sample string 4</Lack_Penetration>
      <MainId>1</MainId>
      <Pore>sample string 5</Pore>
      <Repair_Grinding>sample string 14</Repair_Grinding>
      <Repair_Welding>sample string 15</Repair_Welding>
      <Result_Defect>sample string 17</Result_Defect>
      <Result_DefectType>sample string 18</Result_DefectType>
      <Result_NoDefect>sample string 16</Result_NoDefect>
      <Slag_Inclusion>sample string 6</Slag_Inclusion>
      <SortNo>1</SortNo>
      <Undercut>sample string 8</Undercut>
      <Welds_Pos_No>sample string 10</Welds_Pos_No>
    </Lib_TPCheckPara>
    <Lib_TPCheckPara>
      <Crack>sample string 2</Crack>
      <Defect_No>sample string 11</Defect_No>
      <Defect_Trace>sample string 13</Defect_Trace>
      <Defect_Type>sample string 12</Defect_Type>
      <Final_Class>sample string 19</Final_Class>
      <IId>1</IId>
      <Incompletely>sample string 7</Incompletely>
      <Joint_Defect>sample string 9</Joint_Defect>
      <Lack_Fusion>sample string 3</Lack_Fusion>
      <Lack_Penetration>sample string 4</Lack_Penetration>
      <MainId>1</MainId>
      <Pore>sample string 5</Pore>
      <Repair_Grinding>sample string 14</Repair_Grinding>
      <Repair_Welding>sample string 15</Repair_Welding>
      <Result_Defect>sample string 17</Result_Defect>
      <Result_DefectType>sample string 18</Result_DefectType>
      <Result_NoDefect>sample string 16</Result_NoDefect>
      <Slag_Inclusion>sample string 6</Slag_Inclusion>
      <SortNo>1</SortNo>
      <Undercut>sample string 8</Undercut>
      <Welds_Pos_No>sample string 10</Welds_Pos_No>
    </Lib_TPCheckPara>
  </para>
</TPCheckModel>